From Democratic Republic of the Congo to Marshall Islands
When travelling from Democratic Republic of the Congo to Marshall Islands: None of your Democratic Republic of the Congo plug types fit in Marshall Islands. You will need a travel adapter. Voltage is different (230V → 120V). Check your charger label; if it doesn’t list 120V you’ll also need a voltage converter. Frequency differs (50Hz → 60Hz). Modern phone and laptop chargers are usually fine, but some clocks, motors, and appliances may behave incorrectly.
Democratic Republic of the Congo
Marshall IslandsYour plugs
Type C
No fit
Type E
No fit
Accepted in Marshall Islands
Type A
Type B
0 of 2 plug type(s) match
You: C, E • Marshall Islands: A, B
No fit for: C, E
Voltage: 230V → 120V
Different voltage
You may need a voltage converter.
Frequency: 50Hz → 60Hz
Different frequency
Check device supports both 50/60 Hz.
You will need an adapter and likely a converterAdapters you may need
Your plug shape does not fully match. Voltage differs; check for 100–240V support.
About electricity in Marshall Islands
Marshall Islands runs on 120V/60Hz with Type A and B sockets, the North American standard.
Grid & history
MEC supplies the inhabited atolls, primarily from diesel with growing solar.
Availability
Reliable in Majuro and Ebeye.
Sockets & hotels
Standard North American sockets.
Energy mix
Practical tips
- US plugs fit local sockets directly, so US travellers do not need an adapter.
- The supply matches the US 120V, so US chargers work directly.
Frequently asked questions
- Will my Democratic Republic of the Congo plug work in Marshall Islands?
- No. None of your Democratic Republic of the Congo plugs (Type C, Type E) fit in Marshall Islands sockets (Type A, Type B), so you will need a travel adapter.
- What plug type does Marshall Islands use?
- Marshall Islands uses Type A, Type B. The supply is 120V at 60Hz.
- Do I need a voltage converter for Marshall Islands when travelling from Democratic Republic of the Congo?
- Marshall Islands runs on 120V, while Democratic Republic of the Congo uses 230V. Check your charger label for a 100 to 240V rating; if it does not list 120V you will also need a voltage converter.
- Is the electrical frequency in Marshall Islands the same as Democratic Republic of the Congo?
- Frequency in Marshall Islands is 60Hz, while Democratic Republic of the Congo uses 50Hz. Modern phone and laptop chargers handle either, but clocks, motors, and some heating appliances may behave incorrectly.