From Marshall Islands to Republic of the Congo
When travelling from Marshall Islands to Republic of the Congo: None of your Marshall Islands plug types fit in Republic of the Congo. You will need a travel adapter. Voltage is different (120V → 230V). Check your charger label; if it doesn’t list 230V you’ll also need a voltage converter. Frequency differs (60Hz → 50Hz). Modern phone and laptop chargers are usually fine, but some clocks, motors, and appliances may behave incorrectly.
Marshall Islands
Republic of the CongoYour plugs
Type A
No fit
Type B
No fit
Accepted in Republic of the Congo
Type C
Type E
0 of 2 plug type(s) match
You: A, B • Republic of the Congo: C, E
No fit for: A, B
Voltage: 120V → 230V
Different voltage
You may need a voltage converter.
Frequency: 60Hz → 50Hz
Different frequency
Check device supports both 50/60 Hz.
You will need an adapter and likely a converterAdapters you may need
Your plug shape does not fully match. Voltage differs; check for 100–240V support.
About electricity in Republic of the Congo
Republic of the Congo is 230V/50Hz with Type C and E sockets.
Grid & history
SNE supplies a grid running on hydropower (Imboulou, Moukoukoulou) and gas.
Availability
Reliable in Brazzaville and Pointe-Noire.
Sockets & hotels
Type E (French) standard.
Energy mix
Practical tips
- European C/E adapter works.
- Voltage is the standard 230V, and modern chargers handle it without issue.
Frequently asked questions
- Will my Marshall Islands plug work in Republic of the Congo?
- No. None of your Marshall Islands plugs (Type A, Type B) fit in Republic of the Congo sockets (Type C, Type E), so you will need a travel adapter.
- What plug type does Republic of the Congo use?
- Republic of the Congo uses Type C, Type E. The supply is 230V at 50Hz.
- Do I need a voltage converter for Republic of the Congo when travelling from Marshall Islands?
- Republic of the Congo runs on 230V, while Marshall Islands uses 120V. Check your charger label for a 100 to 240V rating; if it does not list 230V you will also need a voltage converter.
- Is the electrical frequency in Republic of the Congo the same as Marshall Islands?
- Frequency in Republic of the Congo is 50Hz, while Marshall Islands uses 60Hz. Modern phone and laptop chargers handle either, but clocks, motors, and some heating appliances may behave incorrectly.